400W Watt Flexible Solar Panels With 12V 24V Battery Charger Controller Kit

Description 400W Monocrystalline Solar Panels  Clean Energy for Every Lifestyle The power generation efficiency is about 1.3 times that of conventional polysilicon, and the overall area is smaller at the same power. Semi-flexible design, Graceful appearance, delicate cabinet; The surface is made of PET and treated with a special process, which is more wear-resistant and improves the absorption efficiency of sunlight. Convenience to take, fashionable elegance. PV connector can be suitable to connect a controller. Especially suitable for anywhere can obtain sunshine, realize efficient charging, use convenient and safe, environmental protection, and energy saving. This can be used in various scenarios such as households, camping, RVs, yachts, street lights, and solar power stations. The junction box adopts an IP67 waterproof design and contains a bypass diode, and the circuit adopts an overcharge and reverse current protection design. Use a photovoltaic special cable and PV connector. Its outdoor use is safe, waterproof, high-temperature resistance, and weather resistant. PV connector is easy to use, plug and play. This product is a solar module. It is recommended to be used with controllers and batteries. Product Details Solar panel Electrical Specification Maximum power Pmax 100 W Open circuit voltage Voc 21.6 V Maximum power point voltage Vmpp 18 V Short-circuit current I sc 6 A Maximum power point current I mpp 5.5 A Minor reduction in efficiency under partial load conditions at 25°c : at 100 W/m2, 95%- ( /-3%) of the STC (Performance Under Standard Test Conditions) efficiency (1000 W/m2) is achieved. Solar panel Component Material Main material : Monocrystalline silicon Cells per module : 36 Cells Cell type : Monocrystalline Silicon Cell dimensions : 158mm * 158mm / 158 * 79mm Front : EVA Plastic Cover Frame material : PET EVA Cell TPT System Integration Technician Maximum system voltage SC II 1000 V Maximum reverse current 10A Maximum system voltage USA NEC 600 V Increased snow load acc. to IEC 61215 5.4 kN/m2 Thermal Characteristics NOCT 47 °c TC Voc -0.33 %/°c TC Isc 0.042 %/°c TC Pmpp -0.45 %/°c Solar panel Extra Specification PTC rating 100 W Module efficiency 22.0% Junction box IP67 Plus-Sorting* Pflash ge Pmax Cable Length 0.9 M Power tolerance* /- 5 % Dimensions Length (mm) : 1000mm Width (mm) : 500mm Height (mm) : 2.5mm Net Weight (kg) : 1.65kg Package included : 100W kit 1 x 100w solar panel 1 x 10A 12V / 24V charge controller 1 Set Extension cable with PV connector 1 Set cable with alligator clip (connect to battery） 200W kit 2 x 100w solar panel 1 x 20A 12V / 24V charge controller 1 Set Extension cable with PV connector 1 Set 2 in-1 PV connector 1 Set cable with alligator clip (connect to battery) 300W kit 3 x 100w solar panel 1 x 30A 12V / 24V charge controller 1 Set Extension cable with PV connector 1 Set 3 in-1 PV connector 1 Set cable with alligator clip (connect to battery) 400W kit 4 x 100w solar panel 1 x 40A 12V / 24V charge controller 1 Set Extension cable with PV connector 1 Set 4 in 1 PV connector 1 Set cable with alligator clip (connect to battery) Notes for use : This product must not come into contact with highly corrosive substances. It is strictly forbidden to modify, disassemble, drop, and hit the junction box and products by yourself, avoid stepping on the surface and scratching the surface with hard objects during use. A large number of scratches or dirt on the surface of the solar panel may cause the solar cell module to be inefficient, and in severe cases may cause burnout. The suitable ambient temperature range of this product: is -20 ° C-80 ° C, please do not exceed this range. The solar panel must be installed in an area with good sunlight and no shadow. The long-term work of the solar cell module in the sun with shadow may have the risk of burning. It is forbidden to connect the positive and negative poles of the product together, and it is forbidden to put the product into water or fire, otherwise, it will damage the product. The overall power of the photovoltaic module must be less than the rated power of the controller (rated voltage × rated current). It is strictly prohibited to overload the controller. The total voltage of the photovoltaic module connected to the controller must be within the photovoltaic input voltage range of the controller. The inverter can only be connected to the battery, not directly to the controller Safety Instructions : Make sure your battery has enough voltage for the controller to recognize the battery type before the first installation. The battery cable should be as short as possible to minimize loss. The regulator is only suitable for lead acid batteries : OPEN, AGM, GEL, and lithium ions (It is not suited for nickel metal hydride or other batteries). The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator. Controller connection instructions :  Before connecting the solar panel, please connect the controller to the battery first. Connecting the solar panel without connecting the battery may cause the controller to burn out and fail to display. After the controller is connected to the storage battery, connect the above-mentioned series or parallel solar panels to the controller through the transfer cable. Finally, connect the required DC load to the load end of the controller. If the load does not work, press the third button of the controller. According to the controller manual, adjust the parameters you need. Our Policies Shipping Policy All items are brand new and 100% tested before shipping. All items will be shipped within 1-2 business days after payment is cleared. Your package will be shipped from our warehouse. Delivery time varies between 2-5 business days or longer depending on the shipping area. We will try our best to make a fast shipment. Return and Refund Policy All our products have been checked and packed in good condition. We offer a full guarantee on all items bought from our store. If the products are not the same as the description or are broken in transit. we will resend them or refund the money to you. We accept returns within 14 days after you receive the package. We highly appreciate that you can contact us first if any problem occurs. We will do our best to resolve the issues for you. Do You Have Any Questions? After-Sale Service If There Are Any Questions, Don’t Hesitate To Get In Touch With Us In Advance. We Will Reply To You Within 24 Hours (Except Holidays).